Skip to main navigation Skip to content Skip to footer

Cleaning Up a Waterbed Leak


My daughter’s waterbed sprung a leak and everything that was saturated with the water now has a strong chemical odor. We have washed the items with regular laundry detergent, but the odor remains. The most important item I’d like to save is the bed spread. Do you have a recommendation?


I suspect that either the water had some type of preservative, and this is causing your issue, or that the water may have become “foul.”

You didn’t say if the bedspread was bleachable or not. Some colored items are bleachable. If you’re not sure, I recommend consumers do the quick Bleachability Test (2 tspn Clorox® Regular Bleach2 in 1/4 cup water; apply a drop on a hidden colored area like inside seam, hemline or cuff; wait 1 minute and then blot with towel); no color change means it is safe to use bleach on the item. Any color change could also show you the amount of change in color that likely will occur if you proceed with the liquid bleach usage. If you proceed, do a quick liquid bleach soak (Add 1/4 cup Clorox® Regular Bleach2 in gallon of cool water for 5 minutes, or fill your washer enough to cover the bedspread; then add 1/4 to 1/2 cup of bleach to the item.) then wash immediately in the hottest water recommended on the care label using detergent and 3/4 cup Clorox® Regular-Bleach. Check for success after the wash cycle and before dryer-drying. It might require multiple treatments to get the desired result.

If not bleachable, I would first try a more mild oxygen bleach like our Clorox2® Stain Fighter & Color Booster. Again, first do a quick Bleachability Test ( apply a spot of Clorox2 to an inside seam, wait 2-3 minutes, blot dry and check for color change). I would consider a 1/2 to 1 hour presoak in the Clorox2 (see label for instructions) before washing it in the warmest water recommended on the care label with detergent and Clorox2. Check for success before drying, as you may need to do more than one treatment.