How to Make Your Own Disinfecting Solution with Clorox® Bleach
Follow these easy steps using the Clorox® disinfecting bleach you have at home. Always remember to follow the safety precautions on the label.
Tip: Make sure to check that your bleach disinfects before getting started. Disinfecting items will usually say “Kills 99.9% of Germs” or have specific instructions for disinfection on the bottle.
1. If the surface is dirty, pre-clean to remove any dirt or grime.
2. Select your bleach from the list below.
Grab your bottle and locate the UPC number on the back label. It will start with the numbers 44600. Select your UPC number from the drop down list below.
Here's where you can find your UPC number.
Select UPC number
3. Measure bleach and water, then mix.
Make a fresh bleach and water solution every time you clean. Don't save a diluted bleach solution as it will degrade over time into salt and water.
4. Apply the solution directly to the hard, nonporous surface.
You can use a microfiber cloth or a synthetic mop or sponge. Paper towels or other natural fiber materials (such as paper, cotton, wool, bamboo, etc.) should not be used since they degrade the bleach solution, making it less effective.
The diluted solution should be fine to use on the following surfaces, but you should test a small inconspicuous area first.
Appliances
Most bathroom surfaces, including glazed tile, tubs, fiberglass, glass shower doors, vinyl curtains, counters, cabinets, sinks and no-wax floors.
Hard, nonporous kitchen countertops, including synthetic or cultured marble (though not on natural marble)
Other surfaces around the home, including Linoleum, Formica® counters or Corian® countertops, stainless steel, sealed granite and chrome
5. Make sure the surface stays visibly wet for minutes to be effective.
TIP: If you're sanitizing a surface that contacts food or beverages, such as a plastic cutting board or water bottle, follow the instructions for food contact sanitization located here.
If you don't see your UPC number listed please follow the disinfection instructions on the product's label. Always be sure to measure to ensure your bleach to water ratio is correct.
Make sure the surface stays visibly wet for the time specified on the product's label. This is listed in the disinfection instructions, and is often 5+ minutes.
Registrarse toma un minuto, el ahorro será para siempre
¿Ya tienes una cuenta?
¿No puedes encontrar tu contraseña?
Introduce la dirección de correo electrónico que utilizaste para registrarte. Te enviaremos un correo electrónico con tu nombre de usuario y un enlace para restablecer tu contraseña.
Estás en
Bienvenida/o al club.
¡El correo electrónico fue enviado!
Un correo electrónico con instrucciones y un enlace para restablecer tu contraseña, ha sido enviado a tu correo electrónico.
Boletín de noticias “What’s Next”
Sé la primera persona en enterarse de lo que viene en Clorox, desde ofertas hasta consejos y productos.
¡Ya eres parte del grupo!
Este es el comienzo de algo grande.
Mensaje importante de seguridad
El blanqueador y otros desinfectantes no son aptos para el consumo o la inyección en ninguna circunstancia. Las personas siempre deben leer la etiqueta para obtener instrucciones de uso adecuado. Según los Centros para el Control de Enfermedades, desinfectar las superficies con blanqueador y otros productos desinfectantes es una de las formas de ayudar a detener la propagación de la enfermedad COVID-19. Nuestros productos son seguros cuando se utilizan adecuadamente. Es fundamental que todos comprendan los hechos para mantenerse seguros y saludables.
